Freestar V6-4.2L VIN 2 (2004)
3. Lower the RH side of the subframe 50.8 mm (2 inch).
-
Remove the bolts.
-
Lower the subframe.
Item 6: Crankshaft Pulley Removal Note
1. Using the special tool, remove the crankshaft pulley.
Item 7: Crankshaft Front Seal Removal Note
1. Using the special tool, remove the front crankshaft front seal.
Item 7: Crankshaft Front Seal Installation Note
1. Clean and inspect the mating surface.
2. NOTE: Lubricate the crankshaft front seal lips with clean engine oil prior to installation.
