Fusion L4-2.3L VIN Z (2006)
6.
Add two (2) pieces of 19/32" X 19/32" (15 mm x 15 mm) flock tape 164-R4903 (Figure 6). Use PVC foam 164-R4901 from Rotunda Squeak and
Rattle Repair Kit (164-R4900) if flock tape is not available.
7.
Reinstall inner release handle using the WSM, Section 501-14.
8.
Remove white foam blocks off the door if they are on the door (Figure 7).
9.
Reinstall door trim panel using the WSM, Section 501-05.
NOTE
USE A RUBBER MALLET WITH LIGHT PRESSURE TO ENSURE ALL PUSH PIN LOCATIONS ARE FULLY SEATED
Parts Block
WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage
OPERATION
DESCRIPTION
TIME
061416A
2006 Fusion/Milan: Follow
0.6 Hr.
Service Procedure To