ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

All Other Service Bulletins for Engine Control Module:|10-4-1 > < Engine Controls - MIL/Wrench Lamp ON/DTC P0A7C
Page 1
background image

Engine Control Module: All Technical Service Bulletins
Hybrid Systems - MIL ON/DTC's P013A/P0030 Or P0130

TSB 10-17-11

09/13/10

HYBRID - MIL WITH DTCS P013A, P0030, AND P0130

FORD:
2010 Fusion

MERCURY:
2010 Milan

ISSUE
Some 2010 Fusion Hybrid and Milan Hybrid vehicles may exhibit any one of the following diagnostic trouble codes (DTCs) P013A, P0030 and P0130
with a malfunction indicator lamp (MIL) on.

ACTION
Reprogram the powertrain control module (PCM) to the latest calibration using IDS release 68.07 and higher or 69.01 and higher. This new calibration is
not included in the VCM 2010.9 DVD. Calibration files may also be obtained at the website.

WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage And Emissions Warranty Coverage
IMPORTANT: Warranty coverage limits/policies are not altered by a TSB. Warranty coverage limits are determined by the identified causal part.

OPERATION

DESCRIPTION

TIME

101711A

2010 Fusion Hybrid, Milan

0.3 Hr.

Hybrid: Check DTCs And
Reprogram The PCM (Do
Not Use With Any Other
Labor Operations)

DEALER CODING

CONDITION

BASIC PART NO.

CODE

RECALEM

04

Disclaimer

All Other Service Bulletins for Engine Control Module:|10-4-1 > < Engine Controls - MIL/Wrench Lamp ON/DTC P0A7C