ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 3243 > < Initial Inspection and Diagnostic Overview|Page 3241
Page 92
background image

No

A capacitor internal to a module may still be draining, causing irregular resistance readings. WAIT 5 minutes. REPEAT this pinpoint test.

-------------------------------------------------
AC11 CHECK THE MS-CAN (+) AND MS-CAN (-) CIRCUITS FOR A SHORT TOGETHER WITH THE SJB DISCONNECTED

 

-

Disconnect: SJB C2280b .

-

Measure the resistance between the DLC C251-3, circuit VDB06 (GY/OG), harness side and the DLC C251-11, circuit VDB07 (VT/OG), harness
side.

-

Is the resistance less than 5 ohms?

Yes

If the vehicle is equipped with a Parking Aid Module (PAM), GO to AC12. 

If the vehicle is not equipped with a PAM, GO to AC13. 

No

CONNECT the negative battery cable. GO to AC53.

-------------------------------------------------
AC12 CHECK THE MS-CAN (+) AND MS-CAN (-) CIRCUITS FOR A SHORT TOGETHER WITH THE PAM DISCONNECTED

 

-

Disconnect: PAM C4014 .

-

Measure the resistance between the DLC C251-3, circuit VDB06 (GY/OG), harness side and the DLC C251-11, circuit VDB07 (VT/OG), harness
side.

-

Is the resistance less than 5 ohms?

Yes

GO to AC13. 

No

CONNECT the negative battery cable. GO to AC54.

-------------------------------------------------
AC13 CHECK THE MS-CAN (+) AND MS-CAN (-) CIRCUITS FOR A SHORT TOGETHER WITH THE ACM DISCONNECTED

 

-

Disconnect: Audio Control Module (ACM) C240c .

-

Measure the resistance between the DLC C251-3, circuit VDB06 (GY/OG), harness side and the DLC C251-11, circuit VDB07 (VT/OG), harness
side.

Initial Inspection and Diagnostic Overview|Page 3243 > < Initial Inspection and Diagnostic Overview|Page 3241