Fusion FWD L4-2.5L Hybrid (2010)
-
Verify whether the vehicle is equipped with a Driver Door Module (DDM).
-
Is the vehicle equipped with a DDM?
Yes
GO to AC28.
No
GO to AC29.
-------------------------------------------------
AC28 CHECK THE MS-CAN (+) AND MS-CAN (-) CIRCUITS FOR A SHORT TOGETHER WITH THE DDM DISCONNECTED
-
Disconnect: DDM C568b .
-
Measure the resistance between the DLC C251-3, circuit VDB06 (GY/OG), harness side and the DLC C251-11, circuit VDB07 (VT/OG), harness
side.
-
Is the resistance less than 5 ohms?
Yes
GO to AC29.
No
CONNECT the negative battery cable. GO to AC66.
-------------------------------------------------
AC29 VERIFY VEHICLE EQUIPMENT - SIDE OBSTACLE DETECTION
-
Verify whether the vehicle is equipped with side obstacle detection.
-
Is the vehicle equipped with side obstacle detection?
Yes
GO to AC30.
No
REPAIR the circuits. CONNECT all modules. CONNECT the negative battery cable. CLEAR the DTCs. REPEAT the network test with the scan tool.
-------------------------------------------------
AC30 CHECK THE MS-CAN (+) AND MS-CAN (-) CIRCUITS FOR A SHORT TOGETHER WITH THE SOD-L DISCONNECTED
-
Disconnect: Side Obstacle Detection Control Module - Left (SOD-L) C4230 .
-
Measure the resistance between the DLC C251-3, circuit VDB06 (GY/OG), harness side and the DLC C251-11, circuit VDB07 (VT/OG), harness
side.