Fusion FWD L4-2.5L Hybrid (2010)
-
Are the resistances greater than 1,000 ohms?
Yes
CONNECT the negative battery cable. GO to AE43.
No
GO to AE30.
-------------------------------------------------
AE30 CHECK THE HS-CAN (+) AND HS-CAN (-) CIRCUITS FOR A SHORT TO GROUND WITH THE ABS MODULE DISCONNECTED
-
Disconnect: ABS Module C135 .
-
Measure the resistance between the DLC C251-6, circuit VDB04 (WH/BU), harness side and ground; and between the DLC C251-14, circuit
VDB05 (WH), harness side and ground.
-
Are the resistances greater than 1,000 ohms?
Yes
CONNECT the negative battery cable. GO to AE44.
No
If the vehicle is equipped with a 4X4 control module, GO to AE31.
If the vehicle is not equipped with a 4X4 control module, GO to AE32.
-------------------------------------------------
AE31 CHECK THE HS-CAN (+) AND HS-CAN (-) CIRCUITS FOR A SHORT TO GROUND WITH THE 4X4 CONTROL MODULE
DISCONNECTED
-
Disconnect: 4X4 Control Module C3253 .
-
Measure the resistance between the DLC C251-6, circuit VDB04 (WH/BU), harness side and ground; and between the DLC C251-14, circuit
VDB05 (WH), harness side and ground.
-
Are the resistances greater than 1,000 ohms?
Yes
CONNECT the negative battery cable. GO to AE45.
No