Fusion FWD L4-2.5L Hybrid (2010)
16. NOTE: The ACL outlet pipe must be installed prior to completing the fuel system pressure test.
Install the ACL outlet pipe. For additional information, refer to Fuel Delivery and Air Induction.
17. NOTE: The Inertia Fuel Shutoff (IFS) switch was disconnected in the fuel system pressure release.
Connect the IFS switch electrical connector.
18. Connect the battery ground cable. For additional information, refer to Battery.
All engines
19. NOTE: Carry out a Key ON Engine OFF (KOEO) visual inspection for fuel leaks prior to completing the fuel system pressure test.
NOTE: After completion of the fuel system pressure test, open the drain valve on the Fuel Pressure Test Kit and release any residual fuel into a
suitable container prior to removing the tool.
Test the fuel system pressure to make sure it is within the specified range. For additional information, refer to Specifications.
