Fusion FWD L4-2.5L Hybrid (2010)
2. Install the CKP sensor and the 2 bolts.
-
Do not tighten the bolts at this time.
3. Adjust the CKP sensor with the Crankshaft Sensor Aligner.
-
Tighten the 2 CKP bolts to 7 Nm (62 lb-in).
4. Connect the CKP sensor electrical connector.
5. Remove the 6 mm (0.23 in) bolt from the crankshaft pulley.
6. Install the cylinder block plug.
-
Tighten to 20 Nm (177 lb-in).
7. Install the 6 pin-type retainers and the RH splash shield.
8. Install the 4 screws and position the RH fender splash shield aside.
