Fusion FWD L4-2.5L Hybrid (2010)
Engine Control Module: All Technical Service Bulletins
Engine Controls - MIL/Wrench Lamp ON/DTC P0A7C
TSB 10-21-10
11/08/10
HYBRID ONLY - WRENCH LIGHT WITH DTC P0A7C -
BUILT ON OR BEFORE 9/09/2010
FORD:
2010-2011 Fusion
LINCOLN:
2011 MKZ
MERCURY:
2010-2011 Milan
ISSUE
Some 2010-2011 Fusion Hybrid, Milan Hybrid and MKZ Hybrid vehicles may exhibit a wrench light on without driveability concerns and diagnostic
trouble code (DTC) P0A7C (motor electronics over temperature) stored in the powertrain control module (PCM).
ACTION
Reprogram the PCM to the latest calibration using IDS release 69.04 and higher. This new calibration is not included in the VCM 2010.9 DVD.
Calibration files may also be obtained at the website.
WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage And Emissions Warranty Coverage
IMPORTANT: Warranty coverage limits/policies are not altered by a TSB. Warranty coverage limits are determined by the identified causal part.
OPERATION
DESCRIPTION
TIME
102110A
2010-2011 Fusion Hybrid,
0.3 Hr.
Milan Hybrid 2011 MKZ
Hybrid: Check DTCs And
Reprogram The PCM (Do
Not Use With Any Other
Labor Operations)
DEALER CODING
CONDITION
BASIC PART NO.
CODE
RECALEM
04
Disclaimer
