Fusion FWD V6-3.0L (2009)
GO to S19.
-------------------------------------------------
S19 CHECK FOR RESTORED NETWORK COMMUNICATION WITH THE SJB DISABLED
NOTE: When re-running the network test, the network test application must be first closed or the screen display will revert back to the prior run network
test results.
-
Disconnect: BJB Fuse 19 (40A).
-
Enter the following diagnostic mode on the scan tool: Network Test.
-
Repeat the network test.
-
Do all other modules pass the network test?
Yes
INSTALL the removed fuse. Go To Pinpoint Test H. See: Pinpoint Test H: The Smart Junction Box (SJB) Does Not Respond to the Scan Tool
No
GO to S20.
-------------------------------------------------
S20 VERIFY VEHICLE EQUIPMENT - PAM
-
Inspect the vehicle for a Parking Aid Module (PAM).
-
Is the vehicle equipped with a PAM?
Yes
GO to S21.
No
GO to S22.
-------------------------------------------------
S21 CHECK FOR RESTORED NETWORK COMMUNICATION WITH THE PAM DISABLED
NOTE: When re-running the network test, the network test application must be first closed or the screen display will revert back to the prior run network
test results.
-
Disconnect: SJB Fuse 28 (10A).
-
Enter the following diagnostic mode on the scan tool: Network Test.
-
Repeat the network test.
-
Do all other modules pass the network test?
Yes
INSTALL the removed fuse. Go To Pinpoint Test J. See: Pinpoint Test J: The Parking Aid Module (PAM) Does Not Respond to the Scan Tool
No
GO to S22.
-------------------------------------------------
S22 CHECK FOR RESTORED NETWORK COMMUNICATION WITH THE IC DISABLED
NOTE: When re-running the network test, the network test application must be first closed or the screen display will revert back to the prior run network
test results.
-
Disconnect: SJB Fuses 13 (7.5A), 23 (7.5A) and 27 (7.5A).
-
Enter the following diagnostic mode on the scan tool: Network Test.
-
Repeat the network test.
-
Do all other modules pass the network test?
