Fusion FWD V6-3.0L (2009)
-
Tighten to 62 Nm (46 lb-ft).
3. Position the LH front structure-to-subframe splash shield in place and install the 6 pin-type retainers.
4. Position the LH splash shield in place and install the 4 screws.
5. Install the 2 upper transaxle support insulator frame bolts.
-
Tighten to 62 Nm (46 lb-ft).
6. Install the 2 transaxle support insulator bracket bolts.
-
Tighten to 90 Nm (66 lb-ft).
7. Remove the Engine Support Bar.
8. Install the battery and battery tray.
