Fusion FWD V6-3.0L (2009)
3. Install the SSF and install the bolt.
-
Tighten to 9 Nm (80 lb-in).
4. Install the PCB, bracket and bolts.
-
Tighten to 9 Nm (80 lb-in).
5. Install the solenoid body assembly and the 2 bolts.
-
Tighten to 9 Nm (80 lb-in).
6. Install the ground wire and the bolt.
-
Tighten to 9 Nm (80 lb-in).
7. Connect the electrical connectors.
1. Connect the electrical connector for the PCB.
2. Connect the electrical connector for the SSF.