ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Brake Fluid Reservoir (2.0L, 2.3L and Diesel Right?hand Drive) - Remove And Install (12 341 0) > < Caliper Assembly - Front - Remove And Install (12 243 0)

Galaxy 1995 (02.1995-03.2000)

Brake Pedal - Remove And Install (12 333 0)Galaxy 1995 (02/1995-03/2000)
Print Print
Removal and Installation
Remove
1. Disconnect the battery negative lead.
2. Remove the lower crash pad panel, refer to Operation Number 43 644 0.

3. Lower the fuse box assembly.
1. Lower the fuse box.
2. Disconnect the retaining clips.
3. Pull the fuse box up and out to disengage.

4. Disconnect the servo actuator rod from the brake pedal.
1. Remove the actuator rod pin retaining clip.
2. Remove the actuator rod pin.
5. Remove the stop light switch, refer to Operation Number 33 548 0.
6. Remove the pedal de‐activator switch, refer to Operation Number 33 502 0.

7. Remove the brake pedal.
1. Remove the cross shaft clip.
2. Push the cross shaft towards the clutch pedal sufficient to remove the brake pedal.
3. Remove the brake pedal.

8. Remove the pedal guide bush and spring.
1. Remove the spring.
2. Remove the guide bush.
Install
9. Refit the components in the reverse order.

Brake Fluid Reservoir (2.0L, 2.3L and Diesel Right?hand Drive) - Remove And Install (12 341 0) > < Caliper Assembly - Front - Remove And Install (12 243 0)