ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
303-04B Fuel Charging and Controls - 2.8L|Specifications > < Throttle Body

Galaxy 2000.75 (04.2000-02.2006)

Fuel Charging and Controls - 2.8L - Fuel Injection Supply Manifold Galaxy 2000.75 (04/2000-02/2006)
Removal and Installation

Removal

WARNING:
WARNING:Do not smoke or carry lighted tobacco or open flame of any type when working on or near any fuel related components. Highly flammable mixtures are always present and may ignite. Failure to follow these instructions may result in personal injury.
  1. Release the fuel system pressure. For additional information, refer to Section  310-00 Fuel System - General Information.
  1. Remove the intake manifold. For additional information, refer to Section  303-01A Engine / 303-01B Engine / 303-01C Engine / 303-01D Engine.

  1. Disconnect the fuel injector electrical connectors.

  1. Detach the fuel charging wiring harness from the fuel injection supply manifold.

  1. Disconnect the vacuum line from the fuel pressure regulator.

  1. Disconnect the fuel supply and fuel return lines from the fuel injection supply manifold.

  1. Remove the fuel injection supply manifold retaining bolts.

  1. Remove the fuel injection supply manifold.

  1. Remove the fuel injectors from the fuel injector supply manifold.
    • Discard the O-ring seals.

Installation

  1. NOTE:
    NOTE:Install new fuel injector O-ring seals.
    NOTE:
    NOTE:Using a suitable engine oil, lubricate the O-ring seals before installing.
    To install, reverse the removal procedure.

303-04B Fuel Charging and Controls - 2.8L|Specifications > < Throttle Body