| Removal and Installation Removal | | -
Remove the D-pillar trim panel.
For additional information, refer to: D-Pillar Trim Panel (501-05 Interior Trim and Ornamentation, Removal and Installation).
| | | -
Detach the rear quarter window regulator motor arm from the rear quarter window glass. - Remove the retaining screw.
| | | -
Disconnect the diversity antenna electrical connector (if equipped). | | | -
Locally detach the C-pillar weatherstrip. | | | -
NOTE:The rear quarter window glass front trim cover is secured to the C-pillar using double sided adhesive tape. Remove the rear quarter window glass front trim cover. | | | -
With the aid of another technician, using suitable glazing suction cups support the rear quarter window glass. | | | -
With the aid of another technician, remove the rear quarter window glass. - Remove the front retaining screws.
| Installation | | -
To install, reverse the removal procedure. | | |
