Removal and Installation Removal All Vehicles | -
Disconnect the battery ground cable. | | -
- Remove the two bolts.
- Unclip the coolant hose.
| | -
Remove the drive belt lower shield. | | -
De-tension and locally remove the drive belt. - Turn the belt tensioner clockwise.
- If the belt shows any signs of damage or fatigue it should be replaced.
| Vehicles with air conditioning | -
Detach the air conditioning compressor (four bolts). - Support the compressor using suitable wire or cable tie.
| All vehicles | -
Disconnect the alternator wiring. | | -
Remove the two retaining bolts from the rear of the alternator. | | -
Remove the alternator (two front retaining bolts and nut). | Installation All Vehicles | -
Reposition the alternator and loosely secure with the rear retaining bolts. | | -
Refit and tighten the alternator front retaining bolts. | | -
Tighten the two rear retaining bolts. | | -
Reconnect the alternator wiring. | Vehicles with air conditioning | -
Refit the air conditioning compressor. | | -
- Ensure the drive belt is correctly located on all pulleys.
| | -
Reconnect the battery ground cable. | |