ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

414-01 Battery, Mounting and Cables|Specifications > < Battery Tray
Battery, Mounting and Cables - Battery Cables—3.0L Maverick 2001 (12/2000-07/2004)
Removal and Installation

Removal

  1. Remove the battery tray. For additional information, refer to Battery Tray in this section.
  1. Remove the air cleaner assembly. For additional information, refer toSection 303-12 Intake Air Distribution and Filtering.

  1. Remove the fuse junction box cover.

  1. Remove the cables.
    1. Remove the nuts and cable.
    1. Release the lock clip and pull down on the connector.

  1. Remove the bolt from the inner fender bolt.

  1. Remove the battery ground cable bolt and the cable from the top of the transaxle.

  1. Disconnect the harness clip retainer.

  1. Remove the cable ends from starter solenoid.
    1. Remove the upper nut.
    1. Remove the lower nut.
  1. Remove the cable harness from the vehicle.
  1. To install, reverse the removal procedure.

414-01 Battery, Mounting and Cables|Specifications > < Battery Tray