ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
414-02 Generator and Regulator|Specifications > < Generator - 3.0L

Maverick 2001 (12.2000-07.2004)

Generator and Regulator - Generator—2.0L Maverick 2001 (12/2000-07/2004)
Removal and Installation

Removal and Installation

  1. Disconnect the battery cables. For additional information, refer to Section 414-01 Battery, Mounting and Cables.
  1. Remove the drive belt. Refer to Section 303-05 Accessory Drive.
  1. Lower the vehicle

  1. Disconnect the electrical connectors.
    1. Remove the nut and disconnect the B+ cable.
    1. Remove the connector.

  1. Remove the lower generator bolts.

  1. NOTE:
    NOTE:Insufficient clearance does not allow the bolt to be completely removed.
    Loosen the upper generator bolt from the engine but do not remove it from the generator.
  1. Move the generator to the rear of the vehicle, then lift up and out of the engine compartment.
  1. NOTE:
    NOTE:Before reassembling, place the upper bolt into the generator.
    To install, reverse the removal procedure.

414-02 Generator and Regulator|Specifications > < Generator - 3.0L