ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Brake Disc - Vehicles Built From: 12-2003 > < Brake Caliper
Rear Disc Brake - Brake Pads—Vehicles Built From: 12/2003 Maverick 2005 (08/2004-)
Removal and Installation

Removal and Installation

  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Section 100-02 Jacking and Lifting.
  1. Remove the 2 brake caliper guide bolts.
    • To install, tighten to 35 Nm (26 lb-ft).
  1. CAUTION:
    CAUTION:Do not allow the brake caliper to hang by the brake caliper jounce hose.
    Remove the brake caliper and secure the brake caliper to the vehicle.
  1. Remove the inboard and outboard brake pads from the brake caliper.
  1. To install, reverse the removal procedure.

Brake Disc - Vehicles Built From: 12-2003 > < Brake Caliper