ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Steering Gear to Fluid Cooler Return Hose > < Power Steering Pump to Steering Gear Pressure Line

Maverick 2005 (08.2004-)

Power Steering - Power Steering Pump Pulley—Vehicles Built From: 12/2003 3.0L Duratec-VE (VE6) Maverick 2005 (08/2004-)
Removal and Installation

Removal and Installation

  1. Loosen the power steering pump pulley bolt.
  1. Rotate the accessory drive belt tensioner counterclockwise and position the accessory drive belt aside.
  1. Remove the nut and the power steering pump pulley.
    • To install, tighten to 61 Nm (45 lb-ft)
  1. To install, reverse the removal procedure.

Steering Gear to Fluid Cooler Return Hose > < Power Steering Pump to Steering Gear Pressure Line