ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Steering Column Lock Module - Vehicles Built From: 12-2003 > < Steering Column Multifunction Switch

Maverick 2005 (08.2004-)

Steering Column Switches - Ignition Switch—Vehicles Built From: 12/2003 Maverick 2005 (08/2004-)
Removal and Installation

 
Item
Part Number
Description
1
—
Instrument panel steering column cover
2
W705827-S
Lower steering column cover mounting screw
3
W705828-S
Lower steering column cover mounting screws (2 required)
4
3K512
Lower steering column cover
5
3C695
Upper steering column cover
6
11572
Ignition switch

Removal and Installation

CAUTION:
CAUTION:Do not remove the ignition lock cylinder and the ignition switch at the same time or damage to the column can result.
  1. Remove the instrument panel steering column cover.
  1. Remove the 3 lower steering column cover mounting screws.
  1. Remove the lower steering column cover.
  1. Remove the upper steering column cover.

  1. Disconnect the ignition switch electrical connector.

  1. NOTE:
    NOTE:Lower the steering column to the lowest tilt position.
    Remove the ignition switch.
    1. Press the 2 tabs.
    1. Pull the ignition switch outward.
  1. To install, reverse the removal procedure.

Steering Column Lock Module - Vehicles Built From: 12-2003 > < Steering Column Multifunction Switch