Ford Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Engine Ignition Components - Exploded View - Vehicles Built From: 12-2003 >
< Engine Ignition - Vehicles Built From: 12-2004
Maverick 2005 (08.2004-)
Mechanical Repairs
3 Powertrain / 303 Engine
303-07A Engine Ignition - 2.3L Duratec-HE (MI4)
Description and Operation / Diagnosis and Testing
Removal and Installation
Ignition Coil-On-Plug - Vehicles Built From: 12-2003
Engine Ignition - 2.3L Duratec-HE (MI4) - Ignition Coil-On-Plug—Vehicles Built From: 12/2003
Maverick 2005 (08/2004-)
Removal and Installation
Materials
Name
Specification
Silicone Brake Caliper Grease and Dielectric Compound
D7AZ-19A331-A (Motorcraft XG-3) or equivalent
ESE-M1C171-A
Removal and Installation
Disconnect the battery ground cable. For additional information, refer to Section
414-01 Battery, Mounting and Cables
.
Disconnect the ignition coil electrical connectors.
Remove the bolts and the ignition coils.
To install, tighten to 10 Nm (89 lb-in).
To install, reverse the removal procedure.
Apply a small amount of dielectric grease to the inside of the ignition coil boots before attaching to the spark plugs.
Mechanical Repairs
3 Powertrain / 303 Engine
303-07A Engine Ignition - 2.3L Duratec-HE (MI4)
Description and Operation / Diagnosis and Testing
Removal and Installation
Ignition Coil-On-Plug - Vehicles Built From: 12-2003
Engine Ignition Components - Exploded View - Vehicles Built From: 12-2003 >
< Engine Ignition - Vehicles Built From: 12-2004