ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
303-08B Engine Emission Control - 3.0L Duratec-VE (VE6) > < Positive Crankcase Ventilation (PCV) System Components - Exploded View - Vehicles Built From: 12-2003

Maverick 2005 (08.2004-)

Engine Emission Control - 2.3L Duratec-HE (MI4) - Crankcase Vent Oil Separator—Vehicles Built From: 12/2003 Maverick 2005 (08/2004-)
Removal and Installation

Removal and Installation

  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Section 100-02 Jacking and Lifting.
  1. Remove the intake manifold. For additional information, refer to Section 303-01A EngineSection 303-01B Engine.
  1. Remove the 8 bolts and the crankcase vent oil separator.
    • To install, tighten to 10 Nm (89 lb-in).
  1. To install, reverse the removal procedure.
    • Clean the engine block mating surface.

303-08B Engine Emission Control - 3.0L Duratec-VE (VE6) > < Positive Crankcase Ventilation (PCV) System Components - Exploded View - Vehicles Built From: 12-2003