ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Differential Pressure Feedback Exhaust Gas Recirculation (EGR) Sensor - Vehicles Built From: 12-2003 > < Exhaust Manifold to Exhaust Gas Recirculation (EGR) Valve Tube - Vehicles Built From: 12-2003

Maverick 2005 (08.2004-)

Engine Emission Control - 3.0L Duratec-VE (VE6) - Positive Crankcase Ventilation (PCV) Valve—Vehicles Built From: 12/2003 Maverick 2005 (08/2004-)
Removal and Installation

 
Item
Part Number
Description
1
9E499
Positive crankcase ventilation (PCV) tube
2
14A464
PCV valve electrical connector (part of 12A580)
3
6A666
PCV valve

Removal and Installation

  1. Disconnect the battery ground cable. For additional information, refer to Section 414-01 Battery, Mounting and Cables.
  1. Disconnect the positive crankcase ventilation (PCV) tube from the PCV valve and position the tube aside.
  1. Disconnect the PCV valve electrical connector.
  1. CAUTION:
    CAUTION:A new PCV valve must be installed if removed from the valve cover. Damage will occur to the locking mechanism on the PCV valve.
    Rotate the PCV valve counterclockwise and remove the PCV valve from the valve cover.
    • Discard the PCV valve.
  1. To install, reverse the removal procedure.

Differential Pressure Feedback Exhaust Gas Recirculation (EGR) Sensor - Vehicles Built From: 12-2003 > < Exhaust Manifold to Exhaust Gas Recirculation (EGR) Valve Tube - Vehicles Built From: 12-2003