ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Intake Air Distribution and Filtering > < Air Cleaner - Vehicles Built From: 12-2003
Intake Air Distribution and Filtering - 3.0L Duratec-VE (VE6) - Intake Air Resonator Maverick 2005 (08/2004-)
Removal and Installation

Removal and Installation

  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Section 100-02 Jacking and Lifting.

  1. Remove the LH inner fender splash shield.
  1. Remove the bolt and the air intake resonator.
    • To install, tighten to 10 Nm (89 lb-in).
  1. NOTE:
    NOTE:Make sure that the front rubber grommet is seated in the bracket.
    To install, reverse the removal procedure.

Intake Air Distribution and Filtering > < Air Cleaner - Vehicles Built From: 12-2003