ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Crankshaft Position (CKP) Sensor - Vehicles Built From: 12-2003 > < Electronic Engine Controls - Vehicles Built From: 12-2003

Maverick 2005 (08.2004-)

Electronic Engine Controls - 2.3L Duratec-HE (MI4) - Camshaft Position (CMP) Sensor—Vehicles Built From: 12/2003 Maverick 2005 (08/2004-)
Removal and Installation

Materials
Name
Specification
SAE 5W-20 Motorcraft Premium Synthetic Blend Motor Oil
XO-5W20-QSP
WSS-M2C930-A

 
Item
Part Number
Description
1
14A464
Camshaft position sensor (CMP) electrical connector (part of 12B637)
2
W701219-S309
CMP bolt
3
12K073
CMP
4
—
CMP O-ring

Removal and Installation

  1. Disconnect the battery ground cable. For additional information, refer to Section 414-01 Battery, Mounting and Cables.
  1. Disconnect the camshaft position sensor (CMP) sensor electrical connector.
  1. Remove the bolt and the CMP.
    • To install, tighten to 7 Nm (62 lb-in).
    • Inspect the O-ring seal and install new as necessary.
  1. NOTE:
    NOTE:Lubricate the CMP O-ring seal with clean engine oil.
    To install, reverse the removal procedure.

Crankshaft Position (CKP) Sensor - Vehicles Built From: 12-2003 > < Electronic Engine Controls - Vehicles Built From: 12-2003