In-vehicle Repair Special Tool(s) | Remover, Input Shaft Oil Seal 308-375 | | Slide Hammer 100-001 (T50T-100-A) | | Installer, Halfshaft Output Fluid Seal 307-157 (T86P-1177-B) | | Remover, RH Halfshaft Fluid Seal 307-429 | | Installer, RH Halfshaft Fluid Seal 307-428 | Materials Name Specification Motorcraft MERCON(R) Multi-Purpose (ATF) Transmission Fluid XT-2-QDX MERCON(R) Pipe Sealant with Teflon XW7Z-19554-AA WSK-M2G350-A2 Removal | -
Remove the transaxle drain plug and drain the fluid. | | -
Using the special tools, remove and discard the LH differential seal. | Installation | -
Using the special tool, install the LH differential seal. | | -
Using a small amount of pipe sealant on the threads, install the transaxle drain plug. - Tighten to 27 Nm (20 lb-ft).
| | -
Fill the transaxle with clean automatic transmission fluid. | | -
Start the engine and run through all the gears and check fluid level. | | |