In-vehicle Repair Special Tool(s) | Remover, Input Shaft Oil Seal 308-375 | | Slide Hammer 100-001 (T50T-100-A) | | Installer, Halfshaft Output Fluid Seal 307-157 (T86P-1177-B) | | Remover, RH Halfshaft Fluid Seal 307-429 | | Installer, RH Halfshaft Fluid Seal 307-428 | Materials Name Specification MERCON(R) V Automatic Transmission Fluid XT-5-QM (or XT-5-QMC) (US); CXT-5-LM12 (Canada) MERCON(R) V Thread Sealant with PTFE TA-24 WSK-M2G350-A2 Removal | -
Remove the transaxle drain plug and drain the transmission fluid. | | -
If the vehicle is equipped with a PTO, use the special tools to remove the RH differential seal. | | -
If the vehicle is not equipped with a PTO, use the special tools to remove the RH differential seal. | Installation | -
If the vehicle is equipped with a PTO, use the special tools to install the RH differential seal. | | -
If the vehicle is not equipped with a PTO, use the special tools to install the RH differential seal. | | -
Using a small amount of thread sealant on the threads, install the transaxle drain plug. - Tighten to 25 Nm (18 lb-ft).
| | -
Fill the transaxle with clean automatic transmission fluid. | | -
Start the engine and run through all the gears and check fluid level. | | |