ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Forward-Coast-Direct Clutches > < Forward One-Way Clutch

Maverick 2005 (08.2004-)

Automatic Transmission/Transaxle - Forward/Coast/Direct Clutch Cylinder and Reverse Clutch Drum - Disassembly—Vehicles Built From: 12/2003 Maverick 2005 (08/2004-)
Disassembly and Assembly of Subassemblies

Disassembly
  1. NOTE:
    NOTE:Support the assembly of the forward/coast/direct clutch cylinder assembly and reverse clutch drum assembly on a block of wood so that the reverse clutch hub faces upward. This will ease the reverse clutch hub retaining ring removal.
    Remove the reverse clutch hub retaining ring.

  1. Remove the reverse clutch hub.

  1. Remove the reverse clutch drum assembly.

  1. Remove the direct clutch hub and shell from the forward/coast/direct clutch cylinder.

  1. Remove and discard the 2 reverse clutch cylinder seals from the forward/coast/direct clutch cylinder assembly.

  1. NOTE:
    NOTE:Observe the tab orientation of the No. 2 direct clutch thrust washer during disassembly for correct installation.
    Remove the No. 2 direct clutch thrust washer from the forward/coast/direct clutch cylinder.

  1. Remove and discard the forward/coast/direct clutch cylinder hub seal ring.

Forward-Coast-Direct Clutches > < Forward One-Way Clutch