ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Transaxle Support Insulator LH > < Overdrive Servo - Vehicles Built From: 12-2003

Maverick 2005 (08.2004-)

Automatic Transmission/Transaxle - Transaxle Front Support Insulator Maverick 2005 (08/2004-)
In-vehicle Repair

 
Item
Part Number
Description
1
W500644
Cross brace retaining bolts
2
—
Cross brace
3
W500743
Front engine support through bolt
4
W710553-S440
Engine support cross brace nut
5
W706899
Engine support cross brace bolts
6
6E037
Engine support crossmember

Removal

  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Section 100-02 Jacking and Lifting.

  1. Remove the LH splash shield.

  1. Remove the 7 retainers and the LH splash shield.

  1. Remove the 4 bolts and the cross brace.

  1. Remove the bolt for the mount and the 2 bolts for the brace.

  1. Remove the rear bolt and remove the brace.
  1. Remove the 2 bolts from the mount and remove the mount.

Installation

  1. Install a new mount onto the cross brace and install the bolts.
    • Tighten to 115 Nm (85 lb-ft).

  1. Position the cross brace in place and install the nut.
    • Tighten to 175 Nm (129 lb-ft).

  1. Install the 2 bolts for the cross brace.
    • Tighten to 90 Nm (66 lb-ft).

  1. Install the through bolt for the mount.
    • Tighten to 120 Nm (89 lb-ft).

  1. Install the cross brace and the 4 bolts.
    • Tighten to 115 Nm (85 lb-ft).

  1. Install the LH splash shield and the 7 retainers.
    • Tighten to 10 Nm (89 lb-in).

  1. Install the LH splash shield.

Transaxle Support Insulator LH > < Overdrive Servo - Vehicles Built From: 12-2003