ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Differential Seals RH > < Output Shaft Speed (OSS) Sensor - Vehicles Built From: 12-2003

Maverick 2005 (08.2004-)

Automatic Transmission/Transaxle - Turbine Shaft Speed (TSS) Sensor—Vehicles Built From: 12/2002 Maverick 2005 (08/2004-)
In-vehicle Repair

Materials
Name
Specification
Motorcraft MERCON(R) Multi-Purpose (ATF) Transmission Fluid
XT-2-QDX
MERCON(R)

Removal and Installation

  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Section 100-01 Identification Codes.

  1. Remove the 7 retainers and the LH splash shield.
    • To install, tighten to 10 Nm (89 lb-in).

  1. Remove the turbine shaft speed (TSS) sensor
    1. Disconnect the TSS electrical connector.
    1. Remove the TSS sensor bolt.
    1. Remove the TSS sensor.
    • To install, tighten to 13 Nm (10 lb-ft).

  1. NOTE:
    NOTE:When installing the sensor, lubricate the O-ring seal with clean transmission fluid.
    Inspect the O-ring seal for nicks or cuts. Install a new O-ring seal as necessary.
  1. To install, reverse the removal procedure.

Differential Seals RH > < Output Shaft Speed (OSS) Sensor - Vehicles Built From: 12-2003