ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Gearshift Lever Boot - Vehicles Built From: 12-2003 > < External Controls - Vehicles Built From: 12-2003

Maverick 2005 (08.2004-)

Manual Transmission/Transaxle External Controls - Gearshift Lever—Vehicles Built From: 12/2003 Maverick 2005 (08/2004-)
Removal and Installation

 
Item
Part Number
Description
1
W503298-S309
Gearshift lever bolts (4 required)
2
7K391
Gearshift cable clips (2 required)
3
7E395
Gearshift cables
4
7202
Gearshift lever

Removal

  1. Remove the floor console. For additional information, refer to Section 501-12 Instrument Panel and Console.
  1. Remove the 4 gearshift lever bolts.
  1. Remove the 2 gearshift cable clips.
  1. Disconnect the gearshift cables from the gearshift lever.
  1. Remove the gearshift lever.

Installation

  1. Position the gearshift lever.

  1. Connect the select cable.

  1. Connect the gearshift cable.

  1. CAUTION:
    CAUTION:Make sure the clips are set completely within the cable adapter groove and fully seated.
    Install the 2 gearshift cable clips.
  1. Install the 4 gearshift lever bolts.
    • Tighten to 20 Nm (15 lb-ft).
  1. Adjust the gearshift cables. For additional information, refer to Section 308-00 Manual Transmission/Transaxle and Clutch - General Information.
  1. Install the floor console. For additional information, refer to Section 501-12 Instrument Panel and Console.

Gearshift Lever Boot - Vehicles Built From: 12-2003 > < External Controls - Vehicles Built From: 12-2003