| Description and Operation Air Distribution There are 2 sources of air available to the air distribution system: - Outside air
- Recirculated air
Recirculated air is only used when the manual climate control mode selector is set in the MAX A/C, A/C RECIRC or OFF modes. Air distribution within the vehicle is determined by the function selector switch position. Airflow control doors are used to direct airflow within the A/C evaporator housing and heater. Vacuum control motors are used to position the airflow control doors. The air distribution system is designed to provide airflow from the defrost nozzle when no vacuum is applied to any of the vacuum control motors. This is done to prevent a situation where defrost cannot be obtained due to a system vacuum leak. Air enters the passenger compartment from the following locations: - Instrument panel register
- Heater outlet floor duct
- Windshield defroster hose nozzle
- Side window demisters
- Rear footwell duct
Passenger compartment air is exhausted from the vehicle through open windows or through the air extractors located in the rear of the vehicle. | 
