ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Recirculation Blend Door Actuator - Vehicles Built From: 11-2004 > < Blower Motor Switch - Vehicles Built From: 12-2004

Maverick 2005 (08.2004-)

Control Components - Temperature Control Switch—Vehicles Built From: 11/2004 Maverick 2005 (08/2004-)
Removal and Installation

 
Item
Part Number
Description
1
18519
Temperature selector knob
2
W700486
Temperature selector switch screw
3
—
Temperature selector gear

Removal and Installation

  1. NOTE:
    NOTE:Place the temperature selector switch in the full cold position before disengaging the temperature blend door actuator.
    Remove the instrument panel center finish panel. For additional information, refer to Section 501-12 Instrument Panel and Console.
  1. Remove the temperature selector switch knob.
  1. Remove the temperature selector switch screw.

  1. Press the tab and rotate the temperature selector switch counterclockwise.
    • Remove the temperature selector switch.
  1. To install, reverse the removal procedure.
    • Place the temperature selector switch in the full cold position before installation.

Recirculation Blend Door Actuator - Vehicles Built From: 11-2004 > < Blower Motor Switch - Vehicles Built From: 12-2004