Removal and Installation Removal and Installation | -
Remove the screw and the door trim panel bracket. | | -
Position the watershield aside. | | -
Remove the interior door glass weatherstrip. | | -
Connect the window control switch electrical connector. | | -
Using the window control switch, lower the front door window glass to gain access to the front door window glass screws. | | -
Disconnect the window control switch electrical connector. | | -
Remove the 2 front door window glass screws. - To install, tighten to 5 Nm (44 lb-in).
| | -
Remove the front door window glass. | | -
To install, reverse the removal procedure. - Cycle the front door window glass to make sure it is engaged correctly.
| | |