ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

General Procedures|Removal and Installation > < Power Roof Opening Panel Initialization
Roof Opening Panel - Roof Opening Panel Alignment Maverick 2005 (08/2004-)
General Procedures

  1. Loosen the 4 roof opening panel glass screws.
  1. Close the roof opening panel glass.

  1. NOTE:
    NOTE:The correct position of the roof opening panel glass to the roof panel should be -1.50 mm to 0 mm (-0.059 to 0 inch) at the front edge and 0 mm to 1.5 mm (0 to 0.059 inch) at the rear edge of the roof panel.
    NOTE:
    NOTE:Make sure the roof opening panel is centered in the roof opening.
    Adjust the roof opening panel glass.

  1. Tighten the 4 roof opening panel glass screws.

General Procedures|Removal and Installation > < Power Roof Opening Panel Initialization