ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Fuel Injectors > < Fuel Charging and Controls

Mondeo 1997 (08.1996-09.2000)

Fuel Charging and Controls - Liquified Petroleum Gas (LPG) - Fuel Injection Supply Manifold Mondeo 1997 (08/1996-09/2000)
Removal and Installation

Removal

  1. Evacuate the fuel lines. For additional information, refer to Section  310-00A Fuel System - General Information / 310-00B Fuel System - General Information.

  1. Disconnect the fuel injector electrical connectors.

  1. NOTE:
    NOTE:Remove and discard the sealing washers.
    Disconnect the fuel lines.
  1. Remove the air cleaner. For additional information, refer to Section  303-12 Intake Air Distribution and Filtering.

  1. CAUTION:
    CAUTION:Care must be taken not to damage the filament tubes.
    Disconnect the fuel injection supply manifold filament tubes.

  1. Remove the fuel injection supply manifold.

Installation
  1. NOTE:
    NOTE:Install new sealing washers.
    To install, reverse the removal procedure.

  1. Turn the ignition switch to the ON position and carry out a fuel system leak test. For additional information, refer to Section  310-00A Fuel System - General Information / 310-00B Fuel System - General Information.

Fuel Injectors > < Fuel Charging and Controls