ford Workshop Repair Guides

Ford Mondeo Workshop Service and Auto Repair Manuals

ABOUT US
Alternative Fuel Control Module > < Fuel Injection Supply Manifold

Mondeo 1997 LPG Fuel Injectors: Removal and Installation

Fuel Charging and Controls - Liquified Petroleum Gas (LPG) - Fuel Injectors Mondeo 1997 (08/1996-09/2000)
Removal and Installation

Removal

  1. Evacuate the fuel lines. For additional information, refer to Section  310-00A Fuel System - General Information / 310-00B Fuel System - General Information.

  1. Disconnect the fuel injector electrical connectors.

  1. Remove the fuel injector retaining plate.

  1. Remove the fuel injector.

  1. Remove and discard the O-ring seals.

Installation

  1. NOTE:
    NOTE:Install new fuel injector O-ring seals.
    To install, reverse the removal procedure.
  1. Turn the ignition switch to the ON position and carry out a fuel system leak test. For additional information, refer to Section  310-00A Fuel System - General Information / 310-00B Fuel System - General Information.

Alternative Fuel Control Module > < Fuel Injection Supply Manifold