Lubricants, Sealers and Adhesives
Material | Specification |
Refrigerant R134a | WSH-M17B19-A |
Refrigerant oil | WSH-M1C231-B |
Refrigerant Fill Quantities
| Grams |
A/C system (vehicles with condenser coils of 3.0 mm diameter) | 820 ± 17 |
A/C system (vehicles with condenser coils of 1.2 mm diameter) | 700 ± 17 |
Refrigerant Oil Fill Quantities
| millilitres |
A/C system | 200 |
Addition of Refrigerant Oil when new Components are Installed
| millilitres |
Air conditioning compressor (if the amount of refrigerant oil taken from the compressor is less than 90 ml) | add 90. |
A/C compressor (if the amount of refrigerant oil taken from the compressor is between 90 ml and 150 ml) | Add same quantity +30. |
A/C compressor (if the amount of refrigerant oil taken from the compressor is more than 150 ml) | Add the same quantity. |
A/C condenser | add 30. |
A/C evaporator | add 90. |
Renewal of all lines | Add same quantity +2. |
Renewal of all lines and components | add 0. |
Always, if refrigerant was drained. | Add the same quantity. |
Dehydrator/accumulator | Add same quantity +90. |
A/C Compressor Clutch
| mm |
A/C compressor clutch gap | 0.35 - 0.75 |
Tightening Torques
Description | Nm | lb-ft | lb-in |
Bolt, A/C compressor drive plate | 13 | 10 | - |