| Removal and Installation Audio unit removal tools (GV3301) NOTE:When attaching the audio unit removal tools, ensure that they are attached according to the markings on the removal tools: TOP L (left) indicates the top left-hand side of the removal tool, TOP R (right) indicates the top right-hand side of the removal tool. 1. Remove the components in the order indicated in the following illustration(s) and table(s). 1 - Audio unit removal tools 3 - Navigation system control panel connector 7 - Connector for center vent nozzle air outlet temperature sensor 2. To install, reverse the removal procedure. CAUTION:When installing the navigation system control panel, ensure that the audio unit wiring harness, A/C module wiring harness, navigation system control panel wiring harness and antenna cable are not pinched. NOTE:Remove the audio unit removal tools from the navigation system control panel prior to installing the navigation system control panel. Removal Details Item 2 : Navigation system control panel | | -
CAUTION:When removing the navigation system control panel, do not subject the wiring harness to excessive strain. Remove the navigation system control panel from the instrument panel. | Item 4 : Audio unit connector | | -
Disconnect the audio unit connector. - Release the retaining tabs.
| Item 8 : Center vent nozzle air outlet temperature sensor | | -
Turn the center vent nozzle air outlet temperature sensor counter-clockwise through 90 degrees and remove. | Installation Details Item 2 : Navigation system control panel | | -
The audio unit rear bracket must engage in the audio unit mounting. | | 
