Removal and Installation Removal All vehicles | -
Remove the front seat. For additional information, refer to Front Seat in this section. | Driver and passenger seat | -
Detach the cushion heater mat electrical connector (if equipped). - Disconnect the electrical connector.
| | -
Detach the video system electrical connector (if equipped). | | -
Adjust the backrest to the fully upright position. | Passenger seat | -
Disconnect the occupant classification sensor or belt minder sensor electrical connector. | Driver and passenger seat | -
Remove the seat electrical connector mounting bracket. - Detach the underseat connector from the underside of the seat.
- Drill out the rivets.
| | -
Remove the front seat cushion. - Disconnect the seat height adjust motor electrical connector.
- Detach the wiring harness retaining clips.
- Remove the nuts.
| Installation | -
To install, reverse the removal procedure. | |