Removal and Installation Special Tool(s) | 307-242 Remover, Transmission Fluid Cooler | Removal NOTE:Removal steps in this procedure may contain installation details. | -
Remove the right-hand headlamp assembly. Refer to: Headlamp Assembly (417-01 Exterior Lighting, Removal and Installation). | | -
WARNING:Be prepared to collect escaping fluid. CAUTION:Make sure that all openings are sealed. Torque: 10 Nm | | -
WARNING:Be prepared to collect escaping fluid. CAUTION:Make sure that all openings are sealed. | Installation | -
To install, reverse the removal procedure. | | -
Fill the power steering system. Refer to: Power Steering System Filling (211-00 Steering System - General Information, General Procedures). | | -
Bleed the power steering system. Refer to: Power Steering System Bleeding (211-00 Steering System - General Information, General Procedures). | | |