ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Clockspring > < Restraints Control Module (RCM)
Supplemental Restraint System - Passenger Air Bag Deactivation (PAD) Switch Mondeo 2007.5 (02/2007-)
Removal and Installation

Removal

WARNING:
WARNING:The supplemental restraint system (SRS) is active for a certain length of time after the power supply has been disconnected. Wait for a minimum of 3 minutes before disconnecting or removing any SRS components.
WARNING:
WARNING:Make sure that the vehicle electrical system is fully depowered and no other power source is connected.
WARNING:
WARNING:Wear safety goggles.
WARNING:
WARNING:Refer to: Supplemental Restraint System (SRS) Health and Safety Precautions (100-00 General Information, Description and Operation).
NOTE:
NOTE:Removal steps in this procedure may contain installation details.
  1. Disconnect the battery ground cable.
    Refer to: Battery Disconnect and Connect (414-01 Battery, Mounting and Cables, General Procedures).
Vehicles with rear passenger entertainment system
  1. Refer to: Digital Versatile Disc (DVD) Player (415-01, Removal and Installation).
Vehicles with glove compartment cooling

All vehicles

Installation

  1. To install, reverse the removal procedure.
  1. Initialize the door window motors.
    Refer to: Door Window Motor Initialization (501-11 Glass, Frames and Mechanisms, General Procedures).

Clockspring > < Restraints Control Module (RCM)