Mustang V8-5.0L (2011)
3. NOTE:
Use a steering wheel holding device (such as Hunter(R) 28-75-1 or equivalent).
Using a suitable holding device, hold the steering wheel in the straight-ahead position.
4. If equipped, remove the 4 nuts (2 shown) and the strut tower cross brace.
5. NOTE:
The engine appearance cover rubber grommets may remain on the cover. If so, remove the grommets from the cover and install them on the intake
manifold before installing the cover.
Remove the engine appearance cover.
6. Remove the Air Cleaner (ACL) outlet pipe.
7. Remove the 8 pin-type retainers and the radiator sight shield.
