Mustang V8-5.4L SC (2008)
9. Close the glove compartment door.
10. Remove the restraint system diagnostic tools from the clockspring electrical connectors at the top of the steering column.
11. CAUTION: The clockspring electrical connectors are unique and cannot be reversed when connected to the driver air bag module.
Match the electrical connector key to the keyway in the driver air bag module. Do not force the electrical connectors into the driver air
bag module. Damage to the connector or component may occur.
Connect the 2 electrical connectors and position the driver air bag module.
12. Install the 2 driver air bag module bolts (1 shown).
-
Tighten to 7 Nm (62 lb-in).
13. Install the 2 driver air bag module bolt caps (1 shown) in the steering wheel.
