ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Air Bag Deactivation Indicator|Service and Repair|Page 7217 > < Speed Control On/Off Switch|Page 7212
Page 1
background image

Air Bag Deactivation Indicator: Service and Repair

PASSENGER AIR BAG DEACTIVATION (PAD) INDICATOR

Removal and Installation

NOTE:

-

The air bag warning indicator illuminates when the restraints control module (RCM) fuse is removed and the ignition switch is ON. This is normal
operation and does not indicate a supplemental restraint system (SRS) fault.

-

Repair is made by installing a new part only. If the new part does not correct the condition, install the original part and carry out the diagnostic
procedure again.

-

The SRS must be fully operational and free of faults before releasing the vehicle to the customer.

-

The passenger air bag deactivation indicator is part of the hazard switch/traction control switch assembly.

1. Depower the SRS.
2. Remove the console shifter bezel.

Air Bag Deactivation Indicator|Service and Repair|Page 7217 > < Speed Control On/Off Switch|Page 7212