Mustang V8-5.4L SC (2008)
Cruise Control Switch: Service and Repair
SPEED CONTROL SWITCH
Removal and Installation
1. Remove the driver air bag module.
2. NOTE: Carefully grasp and pull the edges to remove the steering wheel spoke finish panels.
If equipped, remove the steering wheel spoke finish panels.
3. NOTE: Using a small, flat-bladed screwdriver, gently pry up the speed control switches from the steering wheel, beginning at the outer edge. Use
care not to damage the steering wheel.
Remove the speed control switches.
-
Disconnect the electrical connectors.
4. To install, reverse the removal procedure.
