Mustang V8-5.4L SC (2008)
3. Remove the 2 screws and the center console top finish panel.
4. NOTE: Passenger side center console kick panel shown, driver side similar.
Remove the driver and passenger center console kick panels.
5. Remove the 6 screws and position out the center instrument panel finish panel.
6. Disconnect the passenger air bag deactivation (PAD) indicator electrical connector.
7. Release the 4 tabs (2 upper and 2 lower) on the PAD indicator and remove it from the center instrument panel finish panel.
8. To install, reverse the removal procedure.
9. Repower the SRS.
