Mustang Cobra V8-281 4.6L DOHC VIN V MFI (1997)
Heater Hose: Service and Repair
REMOVAL
1. Partially drain cooling system.
2. Remove 8 retaining bolts and strut tower brace.
3. Disconnect heater water hoses.
INSTALLATION
1. Apply Premium Cooling System Fluid E2FZ-19549-AA or equivalent meeting Ford specification ESE-M97B44-A to the inside of the heater water
hoses.
2. Install new heater water hoses and clamps.
3. Fill cooling system.
4. Install strut tower brace with 8 retaining bolts. Tighten bolts to 20-30 N.m (15-22 Lb-Ft).