Mustang Cobra V8-281 4.6L DOHC VIN V MFI (1997)
REMOVAL
1. Disconnect battery ground cable.
2. Remove driver side knee bolster to access passive anti-theft system module located to right of fuse junction panel.
3. Remove three fasteners retaining module and bracket and one fastener attaching metal brace near module.
4. Disconnect main wiring harness connector and remove passive anti-theft system module and mounting bracket.
INSTALLATION
1. Follow removal procedure in reverse order.
2. Tighten all three screws to 4-5 N.m (35-44 lb-in).
